Phone: 412.831.3131
Fax: 412.831.8168
E-Mail: office@americominc.net
Crystal Intrusion Sensors
 |
Door/window
sensor
Use door/window sensors to protect
anything that opens and closes, such as doors, windows, jewelry
cases, and gun cabinets. The sensor detects intrusion with a magnet
and reed-switch mechanism that signals an alarm during unauthorized
entry. |
|
|
| Specifications
Magnets included
Color:
White or brown
Dimensions:
1.56" wide, 3.25" high, .88" deep
Batteries:
3.5 VDC 1/2 AA lithium
Battery life: 5-8
years
Compatibility:
all Learn Mode security systems
|
Features
- Installs on anything that opens or
closes
- 2 internal reed switches allow for
vertical or horizontal mounting
- Flat surface mounting
- Tamper switch
|
Back
to top of page [
Back to Simon Home
Page ] [ Back
to Security Main Page ]
 |
Long-Life
Door/Window Sensor
|
| No other sensor can match our Long-Life
Door/Window for staying power. Install it and forget about having to
change the battery. |
| Specifications
Magnet included
Color:
White or brown
Dimensions:
1.56" wide, 3.25" high, .88" deep
Batteries: 3.5
VCD AA lithium (permanent)
Battery life: 15-20
years (10-year warranty on battery)
Compatibility: all
ITI Learn Mode systems
|
Features
- Installs on doors and windows that open
and close
- Built-in terminal strip for connecting
hardwire contacts
- 2 internal reed switches allow for
vertical or horizontal mounting
- 3.5 VDC AA lithium battery (permanent )
- Estimated 20-year battery life
|
|
 |
Micro Door/Window
Sensor is 84% Smaller
|
|
Created to meet consumer demand for less
conspicuous security sensors, the Micro is the smallest sensor of its kind
in the security industry. The wireless Micro, for residential and
commercial intrusion detection, is only 1.75" long by .875" wide
by .5" high--or 84% smaller than standard door/window security
sensors. |
| Specifications
Magnet included
Color:
White or brown
Dimensions: 1.75"
long, .875" wide, .5" high
Battery:
3.0 volt lithium coin-cell (CR2032)
Battery life:
5-8 years
Installation:
magnet mounted on a door or window and sensor mounted on the frame.
Compatibility:
all ITI Learn Mode security systems
|
Features
- Small size, low profile is inconspicuous
- User-replaceable battery lasts 5 years in typical
installations
- Advanced circuit design saves power and extends
battery life
|
|
Back
to top of page [
Back to Simon Home
Page ] [ Back
to Security Main Page ]
 |
Micro Recessed
Door/Window Sensor
|
| Wireless flexibility allows door/windows
protection even where the sensor must be totally concealed. The sensor is
placed in the door frame and the magnet is located in the door. |
|
Specifications
Color: Belgian
gray or brown
Dimensions:
.625" diameter x 3.75" deep hole; magnet requires a .5"
diameter, 1.5" deep hole
Batteries:
3.0 VDC custom lithium battery (permanent)
Battery life:
15 years (typical)
Compatibility:
all ITI Learn Mode systems
Related Accessory: Empty casing; P/N 60-846
|
Features
- Sensors are completely concealed when installed
- Lithium battery for long life
- Supervision assures proper operation of sensors
|
|
 |
Slim
Line Door/Window Sensor
|
|
Slim design
protects anything that opens and closes where the sensor mounting area is
limited, such as narrow casements and window frames. |
| Specifications
Color: White
or brown
Dimensions:
.31" wide, 4.94" high, .88" deep
Batteries: 3.5
VDC 1/2 AA lithium battery
Battery life:
5-8 year battery life
Compatibility: all
Learn Mode systems
|
Features
- Sensors are completely concealed when installed
- Lithium battery for long life
- Supervision assures proper operation of sensors
|
|
Back
to top of page [
Back to Simon Home
Page ] [ Back
to Security Main Page ]
 |
Passive
Infrared (PIR) Motion Sensor
|
| The DS 924 motion
sensor with ITI transmitter motion sensor detects infrared energy given
off by persons in a secured area. An alarm is signaled only when the
sensor is armed and the viewed energy has the correct temperature, motion,
and timing associated with an intruder, thus safeguarding against false
alarms. The sensor uses fresnel lenses to provide a choice of seven
different coverage patterns, including a pattern to protect against
activation by pets. |
|
Specifications
Color: White
Dimensions:
2.75" wide, 4.38" high, 1.75" deep
Battery: 3.5
VDC 1/2 AA lithium battery (DS 924)
Battery life:
Lithium: 5-8 years
Installation: wall
mounting
Compatibility: all
ITI Learn Mode systems
|
Features
- A wall tamper causes an alarm if the sensor is removed
- 3-minute lockout timer extends battery life
- Wall-mounting bracket
|
|
 |
Single
Technology Sound Sensor
|
|
The perfect sensor
for rooms with several windows, the sound sensor has a 360° range up to
15 feet away. |
| Specifications
Color: white
Dimensions:
4.38" diameter, 2" deep
Batteries:
3.5 VDC 1/2 AA lithium
Battery life: 5-8
years
Compatibility:
all ITI Learn Mode systems
|
Features
- Detects sound of breaking glass
- Where appropriate, saves the cost of multiple glass break sensors
- Wireless technology allows placement where needed, not where it's
convenient to run wires
|
|
Back
to top of page [
Back to Simon Home
Page ] [ Back
to Security Main Page ]
 |
Dual
Technology Sound Sensor
|
| Our IntelliSense
Dual Technology Sound Sensor features additional false-alarm prevention
measures that detect the shock and hear the specific frequencies of
breaking glass before signaling an alarm. |
| Specifications
Color: white
Dimensions: 5.5"
x 2.5"
Batteries: Two
3.5 VDC AA lithium batteries or one 9 VDC alkaline or lithium battery
Battery life: 5-8
years
Compatibility: all
ITI Learn Mode systems
|
Features
- Detection coverage of up to 25' in any direction
- Includes a flex and audio microphone
- Adjustable sensitivity
|
|
 |
ITI
Shock Sensor
|
|
ITI shock sensors
are actually two sensors in one. They detect the opening of a window with
the same technology as a door/window sensor. However, a burglar could
smash the window instead of opening it, so shock sensor technology also
detects the shattering of glass. |
| Specifications
Color: White
or brown
Dimensions:
4.88" long, 1.56" wide, .94" deep
Battery: 3.5
VDC 1/2 AA lithium battery
Compatibility:
all ITI Learn Mode systems
|
Features
- 2 built-in reed switches allow for vertical or horizontal mounting
- Detect window openings/closings and breaking glass
- Adjustable sensitivity
|
|
Back
to top of page [
Back to Simon Home
Page ] [ Back
to Security Main Page ]
|
|
Glass
Guard Sensor
The Glass Guard
glass break sensor mounts directly on glass, making it perfect for homes
with big picture windows and for businesses with large storefront glass. |
| Specifications
Tamper switch
Color: white
or brown
Dimensions: 1.5"
wide, 3.25" high, .88" deep
Batteries: 3.5
VDC 1/2 AA lithium battery
Battery life:
5-8 years
Compatibility:
all ITI Learn Mode systems
|
Features
- 5' sensitivity radius
- can be mounted anywhere on glass, at least 1" from glass frame
- adheres to glass being protected
|
Back
to top of page [
Back to Simon Home
Page ] [ Back
to Security Main Page ]
SAW Intrusion Sensors
 |
SAW
Door/window sensor
|
| Use door/window
sensors to protect anything that opens and closes, such as doors, windows,
jewelry cases, and gun cabinets. The sensor detects intrusion with a
magnet and reed-switch mechanism that signals an alarm during unauthorized
entry. |
| Specifications
Magnet included
Color: White
or brown
Dimensions:
1.13" wide, 4.25" high, .88" deep
Batteries: 2
AAA alkaline
Battery life:
4-6 years
Compatibility:
Simon and the Quik Bridge Loop Receiver
|
Features
- Installs on anything that opens or closes
- For low and average traffic areas
|
|
 |
ITI
SAW Passive Infrared Motion Sensor
|
|
The SAW PIR detects
movement inside an enclosed structure.
|
|
Specifications
Color: White
Dimensions:
2.50" wide, 3" high, 2" deep
Battery: 1.5
VDC AA alkaline battery
Battery life:
3-4 years
Installation:
wall mounting
Compatibility:
Simon and Quik Bridge Loop Receiver
|
Features
- Use in large rooms, narrow corridors, and stairwells
- 3-minute motion lockout to conserve battery life
- Optional pet lens
|
|
Back
to top of page [
Back to Simon Home
Page ] [ Back
to Security Main Page ]
SAW
Environmental Sensors
 |
Water
Sensor |
| The
ITI water sensor spares you the headaches of water leaks that go
undetected for hours and even days. The sensor sounds an
environmental alarm when it detects water. Backed by ITI technology,
the Water Sensor delivers environmental monitoring you can rely on. |
| Specifications
Color:
White
Dimensions:
Detector: 1.80" long, .94" wide, .5" deep;
transmitter: 4.5" long, 1.13" wide, .94" deep.
Battery:
two 1.5-volt AAA alkaline batteries
Battery
life: 3-4 years
Transmitter
type: SAW (Surface Acoustic Wave)
Compatibility:
Simon and the Quik Bridge Loop Receiver
|
Features
- Use in basements or other areas where unwanted water may seep
in
|
|
 |
SAW
Freeze Sensor
|
|
| Specifications
Color:
White
Dimensions:
4.5" long, 1.13" wide, .88" deep
Battery:
two 1.5 VDC alkaline AAA batteries
Battery
life: 3-4 years
Transmitter
type: SAW (Surface Acoustical Wave)
Compatibility:
Simon and the Quik Bridge Loop Receiver |
Features
|
|
Back
to top of page [
Back to Simon Home
Page ] [ Back
to Security Main Page ]
 |
Freeze
Sensor |
| Undetected
furnace failure can lead to frozen and burst pipes, and serious
expense. The ITI Learn Mode Freeze sensor safeguards against
extensive damage due to undetected freezing. |
| Specifications
Color:
White
Dimensions:
4.88" long, 1.56" wide, .94" deep
Battery:
3.5 VDC 1/2 AA lithium battery
Battery
life: 5-8 years
Compatibility:
all ITI Learn Mode systems |
Features
- Use in climates where temperatures can drop below 32° F.
- Sends restore signal to control panel when temperature
increases to 55-60° F.
- Crystal technology freeze sensor is compatible with all ITI
Learn Mode systems; SAW technology freeze sensor is compatible
with Simon and the Quik Bridge Loop Receiver.
|
|
 |
Carbon
Monoxide Sensor |
|
ITI's
American Sensor Carbon Monoxide sensor provides early warning of
dangerous carbon monoxide gas levels. A pre-alarm warning feature
indicates low levels of CO, and a built-in ITI Learn Mode
transmitter reports information to an ITI alarm panel. The detector
plugs into an AC power outlet and will operate for four hours
without AC power using its internal rechargeable battery. |
| Specifications
Color:
White
Dimensions:
6.5" wide, 3.5" high, 2.25" deep
Installation:
plugs into wall socket
Compatibility:
Simon and the Quik Bridge Loop Receiver
|
Features
- Test/reset button
- Internal siren signals when CO is present
- Typical transmitter battery life is 3-5 years
|
|
Back
to top of page [
Back to Simon Home
Page ] [ Back
to Security Main Page ]
Fire and Smoke
Sensors
 |
2300
Smoke Sensor |
|
The
System Sensor 2300 Smoke Sensor with ITI transmitter offers the best
fire protection available. Its photoelectric cell detects slow
smoldering fires that give off toxic fumes. Designed to prevent
false alarms, its completely sealed chamber designed to keep out
bugs. A Pre-Alarm/Maintenance Alert automatically reports a dirty
detector prior to causing a false alarm. The 2300 makes it easy to
perform a smoke sensor test without setting off an alarm. The
sensor's tamper switch activates if the detector is removed from its
mounting bracket. |
| Specifications
Color:
white
Dimensions:
5.5" x 2.5"
Batteries:
(2 )2/3A, 3-volt lithium manganese dioxide batteries
Battery
life: 5 years
UL
Standard: UL 268
Compatibility:
all ITI Learn Mode systems
|
Features
- Supervised battery and transmission status
- Field-cleanable smoke chamber
- A Pre-Low Battery feature lets you know you have seven days to
change your batteries before the sensor starts to chirp.
- Built-in alarm siren and LED indicate alarm state
- Compatible with all ITI Learn Mode systems (as a basic smoke
sensor); all 2300 functions work with UltraGard
|
|
 |
Heat
Sensor (Rate-of-Rise) |
|
The
ITI Rate-of-Rise Heat Sensor detects danger in areas where high heat
may normally occur, such as in kitchens or attics. The Heat Sensor
works by detecting rapid temperature changes and extreme heat. |
| Specifications
Color:
white
Dimensions:
4.5" diameter, 2.25" deep
Batteries:
One 9VDC alkaline or lithium battery
Battery
life: 1 year (alkaline); 2 years (lithium)
Compatibility:
all ITI Learn Mode systems
|
Features
- Provides detection in spaces up to 2,500 square feet
- Rate-of-Rise sensor detects heat increases of 15° F/minute.
- A fixed-temperature sensor activates at 135° F.
|
|
Back
to top of page [
Back to Simon Home
Page ] [ Back
to Security Main Page ]
Crystal
Emergency Panic Sensors
 |
Water-Resistant
Pendant Panic Sensor |
| Designed
to go just about anywhere, this sensor allows you to activate a
24-hour emergency alarm whether your at home, in the yard, or in the
shower. |
| Specifications
Necklace cord
(included), belt clip (included), and wall mounting (bracket sold
separately)
Color:
White
Dimensions:
1.75" wide, 2.25" high, .75" deep
Batteries:
3.5 VDC 1/2 AA Lithium Battery
Battery
life: 5-8 years
Compatibility:
all ITI Learn Mode systems
|
Features
- Water and shock resistant
- Recessed panic button prevents false alarms
- Can be worn around neck
- Built-in belt clip allows sensor to be attached to belt or
purse
- Can be supervised
- Wall mounting option
|
|
 |
Pendant
Panic Sensor |
|
Our
Pendant Panic Sensor allows you to wear the sensor and activate an
alarm in an emergency. |
| Specifications
Color:
White
Dimensions:
1.56" wide, 3.81" high, 1" deep
Batteries:
3.5 VDC 1/2 AA Lithium Battery
Battery
life: 5-8 years
Compatibility:
all ITI Learn Mode systems
|
Features
- Recessed panic button prevents false alarms
- Can be worn around neck
- Can be supervised
- Necklace (cord included) and belt holster mounting (holster
sold separately)
|
|
[
Back to Simon Home
Page ] [ Back
to Security Main Page ]
Back
to top of page
HOME
Who
is Americom / Products / Sales
/ Specials / Services
/ FAQ /
Contact Americom / Comments
& Requests
